The Envirolyte® EL-600 unit produces ~600 gallons per day of Acidic Anolyte and ~150 gallons per day of Catholyte on demand when disinfection, sterilization and water purification are required.
The low weight and small dimensions of the unit ease handling, maintenance and transportation.
The strength of Acidic Anolyte in terms of active chlorine concentration can be adjusted by the current setting.
| Specifications of Envirolyte® EL-600 | |
|---|---|
| Enclosure: | 400x300x180mm (hxwxd) |
| Weight: | 14.5 kg |
| Input power: | 230 VAC ±10% |
| Power consumption: | ~1.3 KWT |
| Electrolyzer: | Model HI40536 |
| Total output capacity: | ~750 gallons per day |
| ~600 gallons per day of Anolyte: | pH 2 - 3.5; ORP>1100mV; C.ac ~500mg/l |
| ~150 gallons per day of Catholyte: | pH 11-13; ORP<-900mV |
The Envirolyte® ELA-600 has all the features of the El-600, but it incorporates automation plus easy operating procedures that relieve staff workload.
| Specifications of Envirolyte® ELA-600 units | |
|---|---|
| Hydraulic enclosure: | 400x300x180mm (hxwxd) |
| Electrical enclosure: | 400x300x180mm (hxwxd) |
| Power source: | 230/110 VAC ±10% |
| Power consumption: | ~1.3 KWT |
| Max. output capacity: |
~60 gallons per hour of Acidic Anolyte ~10 gallons per hour of Catholyte |
| Automation: | start/stop by means of two level switches |
| Flow controller: | flow/no-flow protection with alarm and automatic start/shutdown |
| Input valve: | -24 VDC/6BAR |
| Weight: | 23 Kg |
